TR SERIES™

This machine is a stand alone motion controller, specially designed, for ease of use. No programming experience is required to change the TR-Series stopping position. As for its design, a telescopic vertical axis is used to minimize the wear of its components, to increase its speed and to reduce overhead clearance. In addition, a light extruded aluminum structure is employed to establish agility and steady motion. 

The TR-Series is equipped with both pressure and vacuum grip circuits complete with product confirmation and wrist rotation of 90 degrees. We use linear bearing guide ways and self lubricated cylinders to promote durability.

SHUTTLE STAR ROBOT™

This part and runner removal robot removes sprues, runners and light-weight parts from horizontal clamp injection moulding machines. Equipped with a standard two-finger gripper with product confirmation sensor, the SP-650 is a versatile machine that comes with 4 selectable motion patterns. In addition, the robot is controlled by Industrial Embedded SBC and comes with a standard hand-held pendant for easy, remote-controlled operations. Optional light-weight vacuum end-of-arm tooling is also available.

This parts loading robot is a gantry type pick and place robot with one servo drive (Z-axis) and two pneumatic axes (X and Y axes). It is designed to work with plastic Injection Moulding Machines (IMM). It carries metal parts and transports them horizontally inward (to the right) parallel to the mould face and delivers them to the mould.

• Z-axis is the base supporting the X & Y axes, traveling parallel to the mould face

• Y-axis carries the x-axis and goes down into the mold

• X-axis carries the EOAT and extends it close to the mould face

• V is the vacuum holding the parts onto the EOAT and also used to confirm that all parts are secured on the EOAT

• X1-ejector pushes the parts out to the mould face

• C-axis is disabled (could be enable by programming)

• M-magnet is a permanent fixture, no controls required

More detailed information on the SP-650, click on online pamphlet.  For more detailed information on the TR-Series, click here online pamphlet. Adobe Acrobat Reader is required to view the .PDF pamphlet. Please download Adobe Reader if it is not already installed on your machine.

To request further information about our products and services, please fill out our online form.